Finite element analysis of laser shock peening of 2050-T8 aluminum alloy

Laser shock processing is a recently developed surface treatment designed to improve the mechanical properties and fatigue performance of materials, by inducing a deep compressive residual stress field. The purpose of this work is to investigate the residual stress distribution induced by laser shock processing in a 2050-T8 aeronautical aluminium alloy with both X-ray diffraction measurements and 3D finite element simulation. The method of X-ray diffraction is extensively used to characterize the crystallographic texture and the residual stress crystalline materials at different scales (macroscopic, mesoscopic and microscopic).Shock loading and materials’ dynamic response are experimentally analysed using Doppler velocimetry in order to use adequate data for the simulation. Then systematic experience versus simulation comparisons are addressed, considering first a single impact loading, and in a second step the laser shock processing treatment of an extended area, with a specific focus on impact overlap. Experimental and numerical results indicate a residual stress anisotropy, and a better surface stress homogeneity with an increase of impact overlap.A correct agreement is globally shown between experimental and simulated residual stress values, even if simulations provide us with local stress values whereas X-ray diffraction determinations give averaged residual stresses.     

New version of continuous–discrete cubature Kalman filtering for nonlinear continuous–discrete systems

For nonlinear continuous–discrete systems, this paper elaborates a new accurate implementation of continuous–discrete cubature Kalman filter (CD-CKF). As the main contribution of this work, the new Kalman prediction stage begins by integrating the nonlinear continuous model for all the cubature sample vectors; the prior estimate state and covariance prediction are based on the weighted statistics of these integrated cubature sample vectors and the Gauss–Legendre approximation scheme. The new square root form CD-CKF is also derived and accurately implemented by combining with the modified variable stepsize NIRK. As the advantages of proposed approach, the complicated and error-prone processes of solving covariance differential equation or calculating derivatives are avoided, while the positive semi-definiteness of prior error covariance are numerically guaranteed. Simulations of traffic control scenarios further confirm the new approach’s superior filtering performance in both reliability and accuracy.     

Residual coal exploitation and its impact on sustainable development of the coal industry in China

Although China owns large coal reserves, it now faces the problem of depletion of its coal resources in advance. The coal-based energy mix in China will not change in the short term, and a means of delaying the coal resources depletion is therefore urgently required. The residual coal was exploited first with a lower recovery percentage and was evaluated as commercially valuable damaged coal. This approach is in comparison to past evaluations when the residual coal was allocated as exploitation losses. Coal recovery rates, the calculation method of residual coal reserves and statistics of its mines in China were given. On this basis, a discussion concerning the impacts on the delay of China's coal depletion, development of coal exploitation and sustainable developments, as well as technologies and relevant policies, were presented. It is considered that the exploitation of residual coal can effectively delay China's coal depletion, inhibit the construction of new mines, redress the imbalance between supply and demand of coal in eastern China, improve the mining area environment and guarantee social stability. The Chinese government supports the exploitation technologies of residual coal. Hence, exploiting residual coal is of considerable importance in sustainable development of the coal industry in China.     

The Critical Energy Release Rate of Welded Joints Between Fiber-Reinforced Thermoplastics and Metals When Thermal Residual Stress is Considered

Thermal effects on welded joints between fiber-reinforced thermoplastics (FRTPs) and metals have been investigated theoretically and experimentally. Because FRTPs use thermoplastics as the matrix resin, they have advantages over fiber-reinforced thermoset plastics (FRPs or FRSPs), including the ability to be welded. When dissimilar materials are welded together, however, thermal stress occurs due to the different thermal expansions of the materials and affects the energy release rate of the joint. Therefore, a method for evaluating the true energy release rate, including the effect of thermal stress, is necessary for strength evaluation tests. Although several theories that compensate for the thermal stress and evaluate the true energy release rate have already been proposed, they require parameters that are difficult to measure. Therefore, it is difficult to apply them in experimental investigations. In this article, a theoretical method with easily measurable parameters is proposed to calculate the energy release rate of welded double cantilever beam (DCB) joints. The effect of the thermal stress on the critical energy release rate is discussed in terms of the experimental results of a welded DCB specimen composed of a FRTP and an aluminum alloy.     

Statistical modeling of mains zero crossing variation in powerline communication

In this paper, authors investigate statistical modeling of measured mains Zero Crossing (ZC) non idealities in narrowband powerline communication systems (PLC) using time series approach based on autoregressive moving average model (ARMA). For this purpose, Box Jenkins analysis steps are deployed for detected ZC impulsive variations. Estimated models exhibit a good fit based on R-square metric reaching 90%. This modeling approach is extended to three measurement environment: in home, in lab and rural locations. Obtained models are useful for NB-PLC channel emulator implementation.     

An experimental approach to determining the residual lifetimes of wheelset axles on a full-scale wheel-rail roller test rig

The paper describes an experimental method for determining the residual lifetime of wheelset axles which was developed and proved. The procedure includes all necessary steps: crack initiation from an artificially generated surface defect, monitoring of crack growth, and specification of the end-of-test criterion. The crack propagation tests described in this paper were carried out on a complete wheelset that was installed on a full-scale wheel-rail roller test rig using a measured load spectrum. During both the test planning and test implementation phases, considerable attention was paid to the complex processes involved in crack propagation in wheelset axles. In addition to axle material and design issues, important factors that have to be taken into account include sequence effects, the reliability of load cycle omission strategies to reduce the overall duration of testing, static stresses introduced by press-fitting procedures and residual stresses caused by manufacturing processes, and crack closure effects. The results obtained indicate that the method produces reliable results that are of practical relevance. Examples were also presented that indicated how far experimentally determined residual axle lifetimes could still differ from lifetimes calculated using current fracture mechanics modelling techniques.     

Synergistic effects of advanced oxidization reactions in a combination of TiO2 photocatalysis for hydrogen production and wastewater treatment applications

In this paper, the synergistic effects of advanced oxidization reactions in a combination of TiO₂ photocatalysis are comparatively investigated for hydrogen production and wastewater treatment applications. An experimental study is conducted with a photoelectrochemical reactor under a UV-light source. TiO₂ is selected as the photocatalyst due to the high corrosion resistant nature and ability to form hydroxyl radicals with the interaction with photons. The synergetic effects of advanced oxidization processes (AOPs) such as Fenton, Fenton-like, photocatalysis (TiO₂/UV) and UV photolysis (H₂O₂/UV) are investigated individually and in a combination of each other. The Fenton type reagent in the reactor is formed by anodic sacrificial of stainless-steel electrode with the presence of H₂O₂. The influences of various parameters, including pH level, type of the electrode and electrolyte and the UV light, on the performance of the combined system are also investigated experimentally. The highest chemical oxygen demand (COD) removal efficiency is observed as 97.9% for the experimental condition which combines UV/TiO₂, UV/H₂O₂ and photo-electro Fenton type processes. The maximum hydrogen production rate from the photoelectrolysis of wastewater is obtained as 7.0 mg/Wh for the experimental condition which has the highest rate of photo-electro Fenton type processes. The average enhancement with the presence of UV light on hydrogen production rates and COD removal efficiencies are further calculated to be 3% and 20%, respectively.     

Carbon nanorod supported metal alloy nanocubes using polydopamine as location reagent for water splitting

Transition metal catalysts were supposed to be the most likely substitute for commercial noble metal catalysts, and the development of highly active and long-term catalyst for water splitting are the future trend. Herein, Ni rectangular nitrogen doped carbon nanorods@Fe–Co nanocubes (Ni-CNRs@Fe–Co cubes) were fabricated via a facile template-free method. This simple strategy not only realizes the structure tailoring, but also achieves high-quality nitrogen-doping. Specifically, nickel dimethylglyoxime [Ni(dmg)₂] with rectangular rodlike structure was firstly synthesized by solution method, then metal-organic frameworks Fe–Co nanocube with different contents were loaded on rectangular carbon nanorods with polydopamine as the locating and the connecting agent, and finally Ni-CNRs@xFe-Co cubes were obtained by a one-step calcination. A series of electrochemical tests were researched on materials with different metal contents in the 1 M KOH solution. The Ni-CNRs@Fe–Co cubes show excellent electrocatalytic activity in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). For HER and OER, the Tafel slopes were 83.3 mV dec⁻¹ and 71 mV dec⁻¹, the onset potential were −167 mV and 1.62 V, and reached the current densities of 10 mA cm⁻², the overpotential just needed 196 mV and 433 mV, respectively. This novel synthetic strategy will provide a template-free way for cheap electrocatalysts of non-precious metal for OER and HER.